Note: Camshaft/ Lifter/ Timing Gear/ Valve Spring Kit, High Energy ™, For Use With Chrysler Small Block 4.5L-5.9L/273-360 Cubic Inch, Double Roller Chain Drive, Hydraulic Flat Tappet, 1500-5500 RPM Range, 218 Degree Intake Duration @ 0.050 Inch Lift, 218 Degree Exhaust Duration @ 0.050 Inch Lift, 0.454 Inch Intake Valve Lift, 0.454 Inch Exhaust Valve Lift, 110 Degree Lobe Separation, With Lifters/Valve Springs/Retainers/Locks/Valve Stem Seals/Timing Chain Set/Assembly Lube/Decals/Instructions
Key Features
- High Energy Cams™ Are Designed To Improve Your Engine's Efficiency Through Its Unique Lobe Characteristics
- When Installed In The Correct Application , High Energy Cams™ Will Usually Produce Better Gas Mileage And Power
- Limited 1 Year Warranty
Technical Details
- Engine Compatibility: Chrysler Small Block V8 273-360 Cubic Inch
- Timing Type: Double Roller Chain Drive
- Camshaft Type: Hydraulic Flat Tappet
- RPM - Low: 1500
- RPM - High: 5500
- Advertised Exhaust Duration DEG: 268 Degree
- Advertised Intake Duration DEG: 268 Degree
- Exhaust Duration At 0.050 Lift DEG: 218 Degree
- Exhaust Lift IN: 0.454 Inch
- Exhaust Valve Lash IN: 0 Inch
- Idle Characteristics: Noticeable
- Intake Duration Lift At 0.050 Lift DEG: 218 Degree
- Intake Lift IN: 0.454 Inch
- Intake Valve Lash IN: 0 Inch
- Lobe Separation Angle DEG: 110 Degree
- Rocker Arm Ratio: 1.5
- Lifter Style: Hydraulic Flat Tappet
- Outside Diameter Of Outer Spring IN: 1.494 Inch
- Computer Controlled Compatible: No
- Includes Retainers: Yes
- Includes Locks: Yes
- Includes Valve Stem Seals: Yes
- Includes Assembly Lubricant: Yes
- Includes Pushrods: No
- Includes Rocker Arms: No
- Includes Gaskets: No
- Includes Timing Chain Set: Yes
- Includes Decals: Yes
- Grind Number: 268H